Skip to content
Los Anillos del Bosque

October 21, 2026

Rings with copper inlay: the warm tone that ages well

Why copper is the workshop’s most-used inlay, how it patinas with wear, which woods it pairs with, and what to expect from the tone over the years.

Rings with copper inlay: the warm tone that ages well

Why copper

Copper is the inlay used most in the workshop. There are 16 pieces in the catalog that carry it. It is not the most eye-catching: damascus shines more, gold draws more. But copper has something the others do not: it ages. The tone changes with wear, darkens a little, takes on a matte shine, and after years it looks better than new. It is a metal you wear in over time, not just wear.

Copper is soft. That is not a problem: it is the reason it works well in fine inlays. The workshop cuts copper into lines one or two millimetres wide and sets it into the wood. The clearcoat seals everything. The piece is ready for daily wear.

How copper patinas

Copper is not a metal that stays the same. With wear, sweat, and soap, the warm tone deepens. It is not a stain: it is a thin layer of oxide that protects the metal underneath. The patina is even: it covers the whole inlay, not just one part.

To clean it, a dry cloth is enough. If you want to bring back the original bright tone, the workshop can polish the inlay. That happens once a year or when you ask for it. There is nothing to do: the patina is part of the ring. The clearcoat over the wood is touched up under the limited warranty; the copper is not touched.

Which woods it pairs with

Copper warms things up. On light wood, copper reads as a golden line. On dark wood, it reads as a warm line. The 16 in the catalog cover almost all the workshop’s woods:

  • Santos rosewood + copper: the rosewood’s red and copper’s warm tone go together.
  • Grey maple + copper: the light tone lets the copper show clearly.
  • Birdseye maple + copper: the maple’s knots and the copper line read at the same time.
  • Ebony + copper: strong contrast, copper stands out on the black.
  • Koa + copper: two warm tones that balance each other.
  • Barrel oak + copper: the oak’s smoky tone and copper’s warmth.
  • Purple Heart + copper: Purple Heart’s purple and copper are an unusual contrast.

How copper is set in the ring

Copper is not glued: it is fitted. The workshop cuts a groove in the wood, fits the copper line in, and seals with the clearcoat. The inlay goes to the right depth: enough to not lift, enough to not be visible from the inside. The bentwood method —steamed veneers, wrapped over a core, turned by hand, no CNC— leaves the wood layers even, and the copper is set on that base.

There are 16 pieces with copper. Some have a single line. Others have two lines: copper on the outside, wood on the inside. The ring width changes how the inlay reads: at 6 mm the line is fine and subtle; at 9 mm it is wide and visible from a distance. The size range is 6 to 12 in US scale.

Care and price on request

A ring with copper is washed with water and dried. No cream, no special cloth. The clearcoat protects the wood; the copper patinas on its own. If the clearcoat shows wear, the limited warranty covers the touch-up. Structural repair is quoted separately.

There is no price on this page. The price depends on the wood, the width, and the size. Write with what you want, and the workshop gives you the exact price in MXN. Each piece is made to order in Mérida, Yucatán. We have made more than 15,000 rings, and copper is the material that repeats most among them.

Questions in this guide

Copper patinas with wear: it darkens a shade and takes on a matte shine. It does not turn green like a statue, because it is not exposed to weather or marine salt. The clearcoat protects the wood, and the copper ages evenly.

Write on WhatsApp

We use first-party analytics (we never sell data) to improve the workshop. Do you accept?